Easy 6 Step Pledge Glitter Ornaments

We posted this tutorial last year and it was so widely popular that we just had to bring it back this holiday season!  Read on to see how to make your own sparkly ornaments in 6 easy steps, see how my ornaments from last year held up after a year in storage and read some ideas on how to take your ornaments to the next level!

1. Gather your supplies.  You will need:
•Pledge Floor Care Wood Floor Finish (it may be BLUE or YELLOW, just make sure it’s wood floor FINISH and not cleaner)
•Clear ornaments (glass or plastic work- you can even use different shaped ornaments)
•Glitter (fine works best)
•Funnel (a piece of paper rolled into a cone shape works well)

2. Remove the ornament cap and squirt about a tablespoon of the Pledge into the ornament.   Swirl the Pledge around and make sure you get a good even coat over the entire inside of the ornament.  Pour any excess Pledge back into the bottle (or discard).  

3. Insert your funnel into the top of your ornament and pour in glitter of your choice.  I have found that fine glitter works best.  You will need a few tablespoons and you can always add more if necessary. 

4.  Coat the inside of your ornament with the glitter.  I found turning the ornament around helped to assure coverage, but you can shake the ornament too, just make sure to cover the top of the ornament with a towel and your thumb so you don’t cause a glitter explosion!  

5.  Pour the excess glitter back into the container. Tap the sides of the ornament a little to get any loose glitter out.  You don’t want to leave a clump of unstuck glitter in the bottom of your ornament. 

6.  Pop the top back on your ornament!  That’s all it takes!   

 I created sets of these last year as gifts for friends and family and everyone loved them!  I saved some for myself (of course) and they were so sparkly in our Christmas tree.  They really were so easy and FUN to make that I must resist the urge to make more this year!  I pulled my box of ornaments out yesterday, to see how these beauties survived being stored over the summer, and they are still just as glittery as they were last year!  The Pledge dries on the inside and your glitter is stuck tight- no worries that it will not last, these will stay glittery year after year.  😀  

Want to take your ornaments to the next level (as if they weren’t beautiful enough on their own!)?  How about a fancy ornament hanger using the Wire Wind it tool?  The big swirl pattern is PERFECT for ornaments.  There are so many uses for the Wire Wind It Tool (did you see our blog posts on how to use this tool to make pipe cleaner spiders, and personalized wire hangers?). 

You can also monogram or personalize your ornament with some premium Silhouette Vinyl.  Nothing makes a gift more special than having it personalized and it’s so easy to do!  Just cut any letter out and stick it right to the outside of your ornament.  With the glitter on the inside, you don’t have to worry about the vinyl sticking properly!  

You can also use paint to make a cute snowman, like I did with one of my ornaments from last year.  With just a few dots of paint – the possibilities are endless!  

I hope you will give this project a try if you did not try it out last year when we first brought it to you!  It really is fun, easy and FAST.  I created two dozen ornaments in under and hour and they look so high end, people will never know how simple (and really inexpensive) they are to make!  

Happy Crafting!



34 Replies to “Easy 6 Step Pledge Glitter Ornaments”

  1. I have heard mop n glo works just as well for this project. BTW I found this pledge cleaner at my local walmart supercenter 27ounce bottle for $6.83

    debra swatik says:
    1. Yes, I have heard there are a lot of other types of things you can use for this process. This is the only thing I have used and I have made lots of ornaments with that same bottle! It’s amazing how far just a little bit will go!


      Kala says:
  2. Does the pledge hold up. A friend wants me to make these for her to give as gifts and i wouldnt want to do it if the glitter falls off or turns yellow?

    Kristi Scruggs says:
    1. I made my ornaments several years ago and they are still just as sparkly as the day I made them. I haven’t seen any yellowing or glitter falling off. I can’t speak for other ways of doing them (using different glues, etc) but the Pledge seems to be holding it’s own! They’re easy peasy to make and a lot of fun!

      Kala says:
  3. I loved this idea! My 5th grade Sunday school class made these last week and loved them! They were so proud of their creations! Thank you for the terrific idea! You made me shine!

    Lynn says:
    1. Oh that’s awesome! I’m sure the kids loved it, it’s such an easy project, it would be great in a classroom!

      Kala says:
  4. I would love to make these for my students, but I can’t find the Pledge product. It says discontinued at Home Depot, and out of stock at Walmart. Any suggestions or other product that might work as a substitute?

    Thank you!!

    Kerri says:
    1. I have heard people using other things like Polyacrylic and even hairspray or watered down glue. I have not tried anything else (as I have a huge ole bottle of Pledge), but you could give any of those a try!

      Kala says:
  5. Fyi. Pledge changed there lid colors where i live. Wood finish is yellow, and multi finish is blue. Just so y’all know…. Love this….

    Anonymous says:

    Anonymous says:
  7. Great! Another crafty idea using household products. TFS…on my way to HomeDepot!

    Renee Collier says:

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.