Design #6: Dandelion! How to Make Custom DIY Car Decals

I love blowing dandelion seeds, and I love that no one will ever care if you pick one from their yard.  Some people see them as weeds, but I think that sometimes weeds are just flowers growing where they don’t belong.  With my love of dandelions, it’s no surprise that I wanted to add one to my car with my own custom car decal:

image1(5)

I love how tiny of a detail that the Cameo can cut!  Let me share how I created my own “bumper sticker,” click below for the details!

This is design #6 in the 12 Exclusive Vinyl Design series.  >>CLICK HERE TO BUY ALL 12 VINYL DESIGNS<<

Lets take a look at the file:

dandelion project file

The file has a dandelion and 10 little tufts floating away… it feels very breezy to me.   I added this to my car bumper a few years ago and about a week later, I got in an accident where the car was a total loss (sad face).  I miss you Corolla…

dandelion bumper decal

But, such is life, as the decal says!  So I decided to add it to my new vehicle!

First, I duplicated the dandelion.  I have two kiddos, so I wanted to make three dandelions to represent us.  Then I added in the “c’est la vie,” which means “such is life” because I feel that goes really well with what a dandelion means to me.  I measured the space on my car and sized the design to fit.  Next I cut the vinyl and began to weed.  A hook tool is very helpful:

use hook to weedHere is one of my favorite vinyl weeding tips, wrap a scrap of vinyl around your finger, sticky side out, then stick all your little scrap bits to as you weed:

use scrap vinyl when weeding

Once I weeded the design, I covered the whole thing with transfer paper:
apply transfer paperNext, I burnished the design with a scraper tool:

burnish

I then turned the design upside down and removed the vinyl backing sheet.  To help the vinyl release from the backing sheet, I folded the backing sheet over on itself and pressed down as I went:

remove transfer paper

Now I was ready to transfer it to the car.  First I cleaned off the car with a little rubbing alcohol.  This will ensure your vehicle is dirt free allowing the vinyl to stick better:

clean off car

Next, place the vinyl onto the vehicle and rubbed over the transfer paper:

transfer to car

Finally, remove the transfer paper and ensure your design is well adhered:

image1(5)

If you have a decal you want to remove from your vehicle, such as the one from the dealership…

how to remove car decals

You can use a hook tool to work it off:

use a hook tool

Just gently work the hook under the vinyl and peel it off.  For stubborn vinyl, you may need to use a blow dryer to gently heat up the adhesive on the back of the to help it come off.  When the vinyl comes off, you may have a little glue residue left:

sticker removed

I used a little lemon essential oil to remove the residue, but you could use Goo Gone or any other sticker residue remover you choose.

All done!  So happy to have “my decal” on my new vehicle again!

image1(5)

Window V. Bumper: A Sticky Debate

I put my sticker on my bumper, but many people choose to put their decals on their window.  We live in Wisconsin, so I didn’t want to put it on my windshield where I would be scraping ice off the window all winter long.  Putting the vinyl on the car shouldn’t make any difference nor affect the paint job at all.

Think of all the things you could do making your own vinyl car decals!  Memorial decals, your kids sports teams, make your own stick family or advertise your favorite independent consultant business (Thirty One Gifts, doTerra, Origami Owl, Avon, Mary Kay, Younique, etc).

See more about my 12 Exclusive Craft-e-Corner Vinyl Designs here.  >>CLICK HERE TO BUY ALL 12 VINYL DESIGNS<<

silhouette-cameo-tutorial

 

 

 

3 Replies to “Design #6: Dandelion! How to Make Custom DIY Car Decals”

  1. What do you mean when you said you “weeded” the project? I agree with you that many weeds are simply flowers growing in the “wrong” places!

    Adrienne says:
    1. Hi Adrienne,
      Weeding the project just means picking out all the extra pieces that are not part of your design. A sharp hook tool really makes this easier! Hope you enjoyed the design and project 😀
      Kala

      Kala says:
      1. Thanks! I’ve never heard it put that way before, but it makes perfect sense to call it weeding. 🙂

        Adrienne says:

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.